Other Problems With System - Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions

Poor Transmission Quality on Modem
Possible Cause: A high-speed modem is connected through an extension jack on
the control unit to a standard Central Office telephone line; but the line quality is
not sufficient to generate a clear signal when the modem transmits through the
system interface.
What to do: Either connect the modem directly to the network interface jack for a
line, or contact your local telephone company for information about upgrading the
line quality.
If the device works properly, the problem is solved.
If the problem remains, call the hotline.*

Other Problems with System

The following procedure resets the system. Use it when you have any problems
that are not covered elsewhere in this chapter. The procedure disconnects all calls
in progress, but does not erase any system settings, provided that the system
batteries are installed and not low on power .
Possible Cause: System needs a hardware reset.
What to do: Unplug the control unit's power cord from the wall. Wait 10 seconds,
then plug it back in. If the problem remains, call the hotline.*
* In the continental U.S., help is available at 1 800 628-2888. Outside the continental U.S.,
call your Lucent Technologies Representative or local authorized Dealer.
6-35
Troubleshooting