Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 249

Considerations
If SMDR is used, the account code assigned to incoming or outgoing calls
n
prints on call reports. (See
for more information about call reporting.) For forced account code entry, if
a Forced Account Code List exists, only valid account codes are printed on
the call report.
Forced account codes are not required to answer incoming calls at the
n
extensions programmed with this feature.
Valid Entries
1 = Assigned
2 = Not Assigned 4
Programming
(See Figure 2-3 on page 2-23
s
such as and
To program an extension for Forced Account Code Entry:
1. Press
2. At the Extension: prompt, enter the number of the extension to be
programmed. For example, to program extension 15, press
3. To assign or unassign Forced Account Code Entry, press
appropriate value displays.
4. To program another extension, press
shows on the display. Then repeat Step 3.
5. Select another procedure or exit programming mode.
5-134
Feature Reference
''Call Reporting Devices (SMDR)'' on page 4-10
for the location of special programming buttons
e
on system phones.)
f 0 0 s s # 3 0 7
at extension 10 or 11 .
1 5
D
until the
n p
or until the extension number
.