Emergency Phone Number List (#406) - Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions

Emergency Phone Number List (#406)

Description
Related Features
Considerations
Valid Entries
Examples
5-122
Feature Reference
This System Programming procedure creates a list of up to 10 telephone numbers
that all users can dial regardless of dialing restrictions provided they have access
to an outside line. Typical list entries include fire, police, and emergency services
numbers.
If an extension is programmed for Forced Account Code Entry (#307), a
n
user at the extension is required to enter an account code before dialing a
number in the Emergency Phone Number List.
The entries you must make to permit or restrict toll calls differ depending on
n
the setting for Toll Call Prefix (#402). This setting tells the system whether
a "0" (for operator-assisted calls) or "1" (for direct-dial calls) is required
when you make toll calls.
Each telephone number can include up to 12 digits.
n
When programming emergency numbers and/or making test calls to
n
emergency numbers, you should: 1) remain on the line and briefly explain
to the dispatcher the reason for the call before hanging up, and 2) perform
such activities in the off-peak hours, such as early morning or late evening.
Up to 12 digits (0–9)
The examples below show how to enter telephone numbers for the Emergency
Phone Number List in Step 3 of "Programming."
911. To allow 911 calls from any extension that has an outside line, create
n
the following entry for the Emergency List:
911
Overriding Number on a Disallowed List. You can use Emergency List
n
entries to override numbers that would otherwise be disallowed. For
example, if you created Disallowed List entries to prevent calls to area
code 201, but you want to allow calls to a specific number in that area code
(such as the number of a manager who is on call after hours), put the
number in the Emergency List: