Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 74

Table 3-1. Light Patterns for System Phones Intercom status
Light Pattern
Green Flutter (short
on, short off)
Red Broken Flutter
(short on/off, long off)
*
Applies to Caller ID Name Display, Do Not Disturb, Night Service, Outgoing Call Restriction Button,
Privacy, Voice Interrupt on Busy Talk-Back, and VMS Cover, all of which require programming on
a button with lights. Can also apply to Account Code Entry, Background Music, and Call
Forwarding/Call Follow-Me, if any of them are programmed on a button with lights. (For more
information about programming these features, see
Ringing Patterns
System phones have these ringing patterns:
An outside call will ring... ring... ring.
An intercom call will ring BEEP... ring BEEP... ring BEEP . If you have a
system display phone, the caller's extension number (and name if
programmed) will show on the display.
A transferred call, or an unanswered transferred or parked call that is
ringing back at your extension, will ring BEEP BEEP... ring BEEP BEEP...
ring BEEP BEEP.
Pool
Line Button Button
A call is on A call on a
exclusive hold line in the
at your pool is on
extension exclusive
(and can only hold at
be retrieved your
from your extension
extension). and can
be
retrieved
only from
your
extension.
— —
Feature Button
Caller ID
Inspect is on, a
Wake Up
Service call is
being
scheduled
from extension
10.
—
Chapter 5.)
Learning About Telephones
Intercom Auto
Dial Button
A call
transferred to
the extension
programmed
on the button is
now returning
to your phone
or you are
being manually
signaled by the
extension.
Fax
Management
only— the fax
extension is
not answering
calls (may be
out of paper).
3-7