Simultaneous Paging (I*70) - Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions

Simultaneous Paging (I*70)

Description
This feature accesses the loudspeaker paging system, if you have one connected
to the system through the PAGE jack on the primary processor module, and all of
the idle systems phones with speakers assigned to Calling Group 1.
Related Features
You must use Calling Group Extensions (#502) to identify the extensions
n
in Calling Group 1.
Use Loudspeaker Paging to make announcements only over the
n
loudspeaker paging system.
Considerations
You can program a Simultaneous Paging button on a system phone to
n
access with one touch the loudspeaker paging system and idle system
phones with speakers in Calling Group 1.
If the loudspeaker paging system or Calling Group 1 is in use, a user
n
attempting to make an announcement hears a busy tone.
If someone answers a loudspeaker page from a system phone in Calling
n
Group 1, the page becomes an intercom call.
If some extensions in Calling Group 1 have standard, MLC-6, or TransTalk
n
9000-series phones, those extensions are not included in the simultaneous
page (because they do not have built-in speakers).
Programming
(See Figure 2-3 on page 2-23
s
such as and
To program a Simultaneous Paging button:
1. Press
2. Enter the number of the extension to be programmed with this feature.
3. Press a programmable button.
4. Press left
5. Program another button for this extension or exit programming mode.
for the location of special programming buttons
e
on system phones.)
f 0 0 s s c
at extension 10 or 11.
i * 7 0
.
5-231
Feature Reference