Table of Contents
Advertisement
Feature Reference
Overview
This chapter provides reference information for programming and using system
features. Features are listed in alphabetical order. System Programming
procedures include the procedure code (# and three-digit number) in the heading;
dial-code features include the feature code (F for
two- or three-digit code). Headings without codes are general call-handling topics
or Telephone Programming procedures.
Each feature includes the following information, if applicable:
Description
Related Features
Considerations
Valid Entries (
This chapter gives step-by-step instructions, using the following conventions:
All of the instructions in this chapter assume that system phones select
outside lines or pools first and standard phones select intercomStandard
phones; Automatic Line Selection for first (as determined by each
extension's setting for Automatic Line Selection).
See Chapter 2 for a review of the methods and buttons you can use while
in programming mode.
Programming instructions tell you to use the
values for specific settings. You can, however, enter a value using the
dialpad if you prefer. Similarly, there are different ways to exit programming
mode as described in Chapter 2—use the method with which you are most
comfortable.
For Telephone Programming, this chapter provides only the instructions for
Centralized Telephone Programming.
Display prompts in the chapter are shown as they appear on PARTNER
Endeavor-model phones.
= factory setting)
f
i
or I for
, plus a
Examples
Programming
Using
D
button to change
5-1
Advertisement
Table of Contents
