Account Code Entry (F12) - Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions

Programming
(See Figure 2-3 on page 2-23
s
such as
To change the Abbreviated Ringing setting for an extension:
1. Press
10 or 11.
2. Enter the number of the extension to be programmed. For example, to
program extension 12, press
3. To set Abbreviated Ringing, press
displays.
4. To set Abbreviated Ringing for another extension, press
p
Step 3.
5. Select another procedure or exit programming mode.

Account Code Entry (F12)

Description
This feature can be used only from a system phone.
This feature lets a user enter an account code (up to 16 digits) for an outside call
(incoming or outgoing). An account code typically is used to identify a department,
project, or client for charge-back or tracking purposes.
Related Features
You can use Forced Account Code Entry (#307) to identify system phone
extensions that are to enter an account code prior to dialing any outside
number (including those on the Emergency Phone Number List). A forced
account code must be entered at the beginning of a call; however, a
different account code can be entered any time during the call.
You can use Forced Account Code List (#409) to create a list of valid
account codes, which should be distributed to the appropriate users. If a
Forced Account Code List exists, the system checks the list whenever a
user enters a forced account code. If the code is valid, the system provides
the user access to an outside line. If the code is invalid, the system denies
the user access to an outside line.
5-8
Feature Reference
for the location of special programming buttons
e
and on system phones.)
f 0 0 s s # 30 5
1 2
until the extension number shows on the display. Then repeat
.
D
until the appropriate value
n
at extension
or