Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 358

second dial tone begins. You can program an automatic pause of 0 to 5 seconds
after each star code that is autodialed, whether from a touch-tone or a rotary
phone.
Related Features
You can include star codes in Allowed Phone Number Lists and
n
Disallowed Phone Number Lists.
Star Code Dial Delay settings apply to Auto Dialing, Last Number Redial,
n
Personal Speed Dial Numbers, Save Number Redial, and System
Speed Dial Numbers.
If Dial Mode (#201) is set to Rotary, star codes are entered by dialing 11
n
instead of *. If you have users at extensions with Outgoing Call
Restriction (#401) set to Local Only who are calling out on lines with the
Dial Mode (#201) set to Rotary, you should add "11" to an Allowed Phone
Numbers List (#407) and assign the list to these extensions. Otherwise,
when the users at the restricted extensions dial 1 to begin a star code, the
system interprets this as an attempt to place a long-distance call, the call is
blocked, and the user hears the reorder tone.
System Speed Dial Numbers can begin with a star code; the system
n
automatically inserts a delay based on the Star Code Dial Delay (#410)
setting. To program, enter a Pause followed by the star code and the phone
number. For example, press
A Marked System Speed Dial number can also begin with a star code. To
enter it, press
example, press
Considerations
The Star Code Dial Delay is not inserted in manually dialed numbers.
n
If your Central Office provides the second dial tone immediately, you do not
n
need the delay provided by Star Code Dial Delay. In this case, choose the 0
setting to enable restriction checking but avoid the delay.
Valid Entries
0 = 0 Seconds Delay 4
1 = 1 Second Delay
2 = 2 Seconds Delay
3=3 Seconds Delay
4 = 4 Seconds Delay
5 = 5 Seconds Delay
6 = 6 Not Active
h*675551001
*
followed by the star code and the phone number. For
**675551001
.
.
Feature Reference
5-243