Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 312

Valid Entries
3 lines for the PARTNER ACS processor module and 308EC module, plus 2 lines
per 206 or 200 module, plus 4 lines per 400 module
Programming
(See Figure 2-3 on page 2-23
s
such as and
To assign lines to the system at initial system setup:
1. Press
2. Enter two digits for the number of outside lines in the system that you want
to assign to all extensions or the main pool. For example, dialing
means that all extensions are assigned lines 1 through 6 or lines 1 through
6 are assigned to the main pool.
3. Select another procedure or exit programming mode.
for the location of special programming buttons
e
on system phones.)
f 0 0 s s # 1 0 4
at extension 10 or 11.
4
0 6
5-197
Feature Reference