System Time (#103) - Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions

System Time (#103)

Description
This System Programming procedure sets the time that appears on system
display phones.
Related Features
Backup Programming—Automatic (#123) uses the System Time to
n
schedule the automatic backups.
Backup Programming—Automatic (#123) and Backup Programming—
n
Manual (#124) do not backup the System Time.
Restore Programming (#125) does not restore the System Time.
n
Considerations
Be sure that the System Time is set correctly before using backup or
n
restore procedures.
Enter the time in 24-hour notation. In this scheme, the hours of the day are
n
0000 (12 midnight) to 2359 (11:59 p.m.). Since each time must have four
digits, use leading zeros when necessary. For example, to set the time to
9:00 a.m., enter
The time appears on system display phones as a.m. or p.m. (not in 24-hour
n
notation).
Programming
(See Figure 2-3 on page 2-23
s
such as and
To change the System Time:
1. Press
2. Enter a new time in 24-hour notation. For example, to set the time to 2:15
p.m., press
System Time
Data 1415
This time appears on system display phones as 2:15 p.
3. Select another procedure or exit programming mode.
5-258
Feature Reference
0 9 0 0
. For 4:45 p.m., enter
for the location of special programming buttons
e
on system phones.)
f 0 0 s s # 1 03
at extension 10 or 11.
1 4 1 5.
A display similar to the following appears:
1 6 4 5
.