Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 28

Telephones
System Telephones
This guide refers to Lucent Technologies telephones specifically designed to work
with the system as system phones. These include the PARTNER-34D,
PARTNER-18D, PARTNER-18, and PARTNER-6 telephones. You can also use
MLS-34D, MLS-18D, MLS-12D, MLS-12, MLS-6, MLC-6, and the TransTalk©
9000-series wireless phones, including MDW 9000, MDW 9010, and MDW 9030P
Pocketphone, although they are not discussed in this guide. For information about
an MLS-model, MLC-model, or TransTalk 9000-series phone, refer to the
documentation that came with the phone.
System phones have several buttons in common: volume control buttons and the
f C A h ! S
F1582 , , , , and buttons. In addition, each
phone has programmable buttons that can be used for outside lines, pools,
extension numbers, outside phone numbers, or system features. Outside lines
and pools, as well as some system features, require buttons with status lights.
Programmable buttons without lines or pools assigned to them can be
programmed with numbers or features, so you can use the feature or dial the
number with one touch. The number in each PARTNER-model name indicates the
i
number of programmable buttons with status lights and two buttons.
If the PARTNER-model phone has a display, indicated by a "D" in the model
name, users receive messages and prompts when making calls and when
programming. (More information about the display is provided in Chapter 5.) A
system display phone is required for system programming.
Valid system extensions depend on which release of PARTNER ACS you have.
Release 1.X extensions are 10 - 41. Release 2.x extensions are 10 - 49.
Throughout this guide, all references to "system extensions" are within these
release-dependent ranges.
Valid system lines also depend on which release of PARTNER ACS you are
using. With System 1.X system line capacities are 01 to 15. With Release 2.0 or
later, system line capacities are 01 to 19. Throughout this guide all references to
"system lines" are within these release-dependent ranges.
Table 1-4 summarizes PARTNER-model system phone features.
1-13
Overview