Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 195

3. At the Extension: prompt, enter the number of the extension to be
programmed. For example, to select extension 31, dial
4. To assign or unassign the extension, press
value displays.
5. At this point:
6. Select another procedure or exit programming mode.
5-80
Feature Reference
To program another extension, press
extension number shows on the display. Repeat Step 4.
To program another group, press
repeat Steps 2 through 4.
3 1
.
D
until the appropriate
n p
or
N P
or
until the
and