Contact Closure Devices - Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions

Call Accounting Devices
You can send call information to a call accounting device (such as Lucent
Technologies' Call Accounting Terminal—Basic or Plus) if you want to further
analyze call activity. The device stores rate table information and processes the
information it receives into meaningful reports that can help you optimize your
communications system. The primary application for call accounting devices is
"accounting," or pricing of the calls.
The call accounting device connects directly to the SMDR jack on the PARTNER
ACS processor module and can also print out reports that include summaries by
hour, line, and extension. Refer to the manual provided with the call accounting
device for instructions on connecting it to your system.

Contact Closure Devices

The Contact Closure Adjunct plugs into a jack on the PARTNER ACS processor
module and has two Contact Closures that can be used to control devices such as
an electronic door lock (as shown in
controlled must be wired to the Adjunct by an electrician in accordance with local
electrical codes. See
Figure 4-6. Contact Closure Adjunct
Using Contact Closure Devices
You must designate which extensions are eligible to use the Contact Closures and
you must program how the contacts will respond when activated. Then users at
eligible extensions can program a button on their phones or they can simply use
f 4 1
Closure 2).
4-14
Using Auxiliary Equipment
Chapter A, ''Specifications'', for more information.
Contact
Closure
Adjunct
Ext X
CONTROL
UNIT
Ext Y
Doorphone
Alert
Extension
(to activate Contact Closure 1) or
Figure 4-6) or an alert. The device being
Contact
Closure
Door with
1
Electronic
Lock
Doorphone
f 4 2
(to activate Contact