Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 23

PC Card slots). You can buy PC Cards to use in these slots for the following
purposes:
Use a Backup and Restore PC Card to backup or restore telephone and
system programming.
Upgrade from PARTNER ACS Release 1.0 to Release 1.1 or Release 2.0
or later using a PC Upgrade card. After powering down the system, you
insert the PC Upgrade Card and turn the power back on. While the system
upgrades, the bicolor (red/green) power LED on the processor flashes
green and red alternately. When the upgrade is finished (in about 20
seconds), the power LED becomes steady green. All of your system and
extension programming will be saved and ready to work with the new
release.
Use a PC Card to store Automatic System Answer and Direct Extension
Dial messages. You can insert the card in either PC Card Slot 1 or PC Card
Slot 2 of the ACS Processor Module Release 2.0 or later.
For Release 1.1 and 2.0 or later, use a PARTNER Voice Messaging PC
Card to provide messaging features (store personal greeting and store and
retrieve callers' messages) for up to four mailboxes.
For information on installing PC Cards, " PARTNER ACS PC Card Installation
Instructions ."
System Capacity
The PARTNER ACS release you have, the carrier you use and the combination of
modules installed determine the number of available lines and extensions:
For PARTNER ACS Release 1.0 and 1.1, the carrier you use and the
combination of 206 and 400 modules installed determine the number of
available lines and extensions. The system allows up to 15 lines and up to
32 extensions; however, these maximums cannot be achieved
simultaneously:
1-8
Overview