Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 206

2. At the Extension: prompt, enter the source extension to copy from. For
example, to copy the current settings from extension 18, press
3. At the Data- - - - - - - - - - - - prompt, enter the target
extension to copy to—any extension except the source extension is valid.
For example, to copy to extension 22, press
4. At this point:
To copy the same settings to another extension, enter the new
extension number.
To copy another extension's settings, press
the extension number shows on the display. Repeat Step 3.
5. Select another procedure or exit programming mode.
1 8
2 2
.
n p
or
Feature Reference
.
until
5-91