Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 183

Programming
(See Figure 2-3 on page 2-23
s
such as
To program the extension to log answered calls:
1. Press
10 or 11.
2. Enter the number of the extension to be programmed. For example, to
program extension 12, press
3. To set Caller ID Log Answered Calls, press
value displays. (See "Valid Entries.")
4. To set Caller ID Log Answered Calls for another extension, press
p
or
Step 3.
5. Select another procedure or exit programming mode.
5-68
Feature Reference
for the location of special programming buttons
e
and on system phones.)
f 0 0 s s # 3 1 7
1 2
until the extension number shows on the display. Then repeat
.
D
until the appropriate
at extension
n