Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 379

Programming
(See Figure 2-3 on page 2-23
s
such as and
To change the number of times a transferred call rings before returning to the
transfer return extension:
1. Press
2. Enter a setting (0–9). For example, to set a Transfer Return of 5 rings,
press
Transfer Return
5 Rings
3. Select another procedure or exit programming mode.
5-264
Feature Reference
for the location of special programming buttons
e
on system phones.)
f 0 0 s s # 1 0 5
at extension 10 or 11.
D
until a display similar to the following appears: