Voice Mailbox Transfer (F14) - Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions

Voice Mailbox Transfer (F14)

Description
This feature applies only if you have a voice messaging system. It is
available only on system phones.
This feature lets a system phone user transfer a caller directly to a specific
extension's voice mailbox, in order for the caller to leave a message without first
ringing the extension. This feature is useful when a user knows that a co-worker is
away from his or her desk.
Related Features
While a call is being transferred, the caller hears ringing if Ring on Transfer
(#119) is Active. If it is Not Active and Music On Hold (#602) is Active and an
audio source is connected to the system, the caller hears music-on-hold while the
call is being transferred to the voice mailbox. If Music On Hold is Not Active and
Ring on Transfer (#119) is Not Active, the caller hears silence.
Considerations
You can program a Voice Mailbox Transfer button on a system phone to transfer a
caller directly to a voice mailbox by pressing the button then dialing the mailbox
subscriber's extension number.
Programming
(See Figure 2-3 on page 2-23
s
such as and
To program a Voice Mailbox Transfer button:
1. Press
2. Enter the number of the extension to be programmed with this feature.
3. Press a programmable button.
4. Press
5. Program another button for this extension or exit programming mode.
5-278
Feature Reference
for the location of special programming buttons
e
on system phones.)
f 0 0 s s c
at extension 10 or 11.
f 1 4
.