Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 328

2 Not Assigned
For auxiliary pools only, if you want to assign the pool to a specific
n
button, press 3. A display similar to the following appears:
Pool Ext Assign 15 P881
3 Select a Button
Then press a button with lights to assign the auxiliary pool to that button. If
you use option 3 after an auxiliary pool has been assigned, the auxiliary
pool moves from the old button to the new button you select.
5. At this point:
To assign another pool for this extension, press
n
access code shows on the display. Then repeat Step 4.
To program another extension, press
n
6. Select another procedure or exit programming mode.
n p
or until the pool
N P
and begin at Step 2.
Feature Reference
5-213