Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 90

Single Answering Machine
The single answering machine setup
answering machine is connected to its own extension, and can cover all the lines
in the system, or as many lines as you assign to it. You can install the answering
machine on an extension by itself, or combine it with a system phone or a
standard phone on the same extension (see "Combination Extensions" in the
PARTNER Advanced Communications System Installation guide).
Figure 4-1. Single Answering Machine
To Use
Go to the machine to manually play back messages.
From any system extension, make an intercom call to the answering
machine extension. When the machine answers, dial its message retrieval
code.
From outside the system, call in on any line assigned to the machine.
When the machine answers, dial its message retrieval code.
To Program
1. If extension X is a key extension, use Line Assignment (#301) to assign
all the lines to extension X that you want the answering machine to cover.
If extension X is a pooled extension, use Line Extension Assignment
(#314) to assign all the pools to extension X that you want the answering
machine to cover. Also, use Line Assignment (#301) to assign any
individual lines to extension X that you want the answering machine to
cover.
2. Set Line Ringing for all lines and pools assigned to extension X to
Immediate Ring.
(Figure
Telephone
(optional)
Lines
CONTROL
UNIT
Ext X
4-1) serves the entire system. The
Ext. Message
Intercom Intercom
ABC DEF
+ Feature 1 2 3
– Conf GHI JKL MNO
4 5 6
PQRS TUV WXYZ
Mic Transfr
HFAI 7 8 9
Spkr Hold * 0 #
ANS
MACH
Using Auxiliary Equipment
4-5