Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 63

NOTE:
You can have only one button for a target extension per extension. The
button can be programmed as a Manual Signaling button or as an Auto Dial
button for intercom ringing or voice signaling.
Fax Management. A button (labeled Fax-30) is programmed as a Fax
Management button for the fax machine connected to extension 30. The
lights next to the button show what is happening at the fax machine (for
example, red broken flutter indicates that the fax machine is not
responding—for example when it is out of paper). (For more information,
see ''Using the Fax Management Feature'' on page
PARTNER-34D
Phone
Line/
Programmable
Buttons
Any unused
line button is
Intercom Intercom
programmable
Figure 2-5. Button Programming for Receptionist's Phone
Alternatively, the receptionist can use an Intercom Autodialer for the extensions
the receptionist dials most frequently. This leaves buttons on the phone free for
more features and phone numbers.
2-32
Programming
Ext.
Message
4-16.)