Display Language (#303); For The Location Of Special Programming Buttons; Such As S And E On System Phones.) - Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions

Display Language (#303)

Description
This System Programming procedure identifies the language in which display
messages appear if the extension has a system display phone. The language is
set for each extension, so phones in the same system can display different
languages.
Considerations
If SMDR is used, the call report header is printed in the language specified for
extension 10.
Valid Entries
1 = English
2 = Spanish
3 = French
Programming
(See Figure 2-3 on page 2-23
s
such as
To change the Display Language setting for an extension:
1. Press
10 or 11.
2. Enter the number of the extension to be programmed. For example, to
program extension 11, press
The current display language displays.
3. To change the display language, press
displays.
4. To change the display language for another extension, press
until the extension number shows on the display. Then repeat Step 3.
5. Select another procedure or exit programming mode.
5-114
Feature Reference

for the location of special programming buttons

e
and on system phones.)
f 0 0 s s # 3 0 3
1 1
.
D
until the appropriate value
at extension
n
or