Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 66

3. Dial the extension number of the telephone to be programmed.
The green lights next to buttons on which lines or pools are assigned show
the current Line Ringing settings; remaining buttons can be programmed
with telephone numbers, extension numbers, or system features.
4. At this point, you can:
5. Program Personal Speed Dial Numbers, Auto Dial numbers, or system
features as described in
To erase the current programming from a button, press the button, then
!
press
6. To change the settings for another extension, press
the new extension number.
7. To exit programming mode, you can press
off-hook, then place it back in the cradle.
Changing Programming Type
When you are in programming mode, you can move between System
Programming and Centralized Telephone Programming. To change to System
Programming when you are in Centralized Telephone Programming, press
c
Programming when you are in System Programming, press
Using Extension Programming
Users can program features or store numbers on buttons from their own phones
using Extension Programming. Keep in mind the following exceptions:
Automatic Line Selection and Line Ringing always must be
programmed using Centralized Telephone Programming.
Use Automatic Line Selection to change the order in which the
telephone selects a line or pool when the user picks up the handset.
(If you want to change Automatic Line Selection for an extension,
you must do so immediately after you enter programming mode and
dial the extension number.)
Use Extension Name Display to assign a user's name to the
extension. See Chapter 5
Line Selection, this procedure must be done immediately after you
enter programming mode and dial the extension number. If you want
to change both Automatic Line Selection and Extension Name
Display, first change Automatic Line Selection, then press
c
, redial the extension number, then use Extension
Name Display.)
Use Line Ringing to change the ringing for an individual line or
pool.
Chapter
.
s
then . To move back to Centralized Telephone
for the character codes. (Like Automatic
5.
c
f 0 0
, or lift the handset
c
Programming
, then dial
.
2-35