Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 285

n
Line Assignment 15 L01
3 Select a Button
Then press a button with lights to assign the line to that button. If you use
option 3 after a line has been assigned, the line moves from the old button
to the new button you select.
5. At this point:
n
n
6. Select another procedure or exit programming mode.
5-170
Feature Reference
If you want to assign the line to a specific button, press
similar to the following appears:
To program another line for this extension, press
number shows on the display. Then repeat Step 4.
To program another extension, press
3
. A display
n p
or until the line
N P
and begin at Step 2.