Music On Hold Volume (#614) - Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions

Music On Hold Volume (#614)

Description
This System Programming procedure allows you to select one of seven volume
settings for the external music source provided through the MUSIC ON HOLD
jack on the PARTNER ACS processor module. This setting is system-wide.
Related Features
Music On Hold (#602) activates or deactivates the MUSIC ON HOLD jack on the
processor module.
Considerations
Changes to the Music On Hold Volume setting will have immediate effect on all
calls currently receiving Music On Hold treatment.
Valid Entries
Figure 5-7.
Programming
(See Figure 2-3 on page 2-23
s
such as and
To change the Music On Hold Volume setting:
1. Press
The display shows the current setting.
2. To change the setting, press the number of the setting on the dialpad, or
press
3. If you want to return the volume to the default setting, press
5-190
Feature Reference
1
2
3
4
5
6
7
for the location of special programming buttons
e
on system phones.)
f 0 0 s s # 6 1 4
at extension 10 or 11.
D d
or until the correct setting is displayed.
+ (lowest volume)
+
+
+
+
+
+ (highest volume)
r
.