Extension Number; Extension Programming - Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions

Glossary
Direct Extension Dial—Release 2.0 or later
An optional feature that enables outside callers to dial an extension or Hunt Group directly, without
waiting for the receptionist to transfer the call. See Automatic System Answer. See also Automatic
System Answer/Direct Extension Dial PC Card.
Doorphone
A Lucent Technologies proprietary phone that can be wall mounted outside your office or in a lobby
to allow visitors to alert any number of system extensions by pressing a button. The doorphone
includes a speaker and microphone, to allow two-way conversation between the doorphone and
the phone that answers.
Do Not Disturb
A feature that prevents incoming calls from ringing at an extension. See also Send All Calls.
E
Extension
An endpoint in the system that connects telephones or standard devices, which can be dialed
i
using the button. See also Programming extension.
Extension jack
The location on a PARTNER ACS processor module, 206 modules, and 308EC modules that
allows you to connect extension wiring to the control unit for phones (or other telecommunications
devices).

Extension number

The number assigned to each extension jack on a PARTNER ACS processor module or a 206
module. Extension numbers are used for intercom calling.
Extension Name Display
A feature that lets users assign a name to their extension. The name appears along with the exten-
sion number on system display phones when users make an intercom call or a group call, or trans-
fer a call.

Extension Programming

A method of telephone programming that lets users program their own extensions from their sys-
tem phones. See also Centralized Telephone Programming.
External Hotline
A standard phone that is programmed to dial a predetermined outside number when a user lifts the
handset. See also Hotline phone.
F
Fax Management button
GL-4