Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 244

Considerations
Under certain conditions of heavy telephone usage, the external hotline
n
may be unable to dial the programmed number immediately (for example, if
many of the standard devices connected to your system dial out at the
same time). See "Using" for more information.
A standard phone without a dialpad is recommended for use as the
n
external hotline.
You can identify several extensions as external hotlines.
n
Do not assign an external hotline to extension 10, 11, or to the first two
n
extensions of any 206 or 308EC modules, which are reserved as power
failure extensions.
Valid Entries
Any extensions except for 10, 11, or the first two extensions of any 206 or 308EC
modules.
1 = Assigned
2 = Not Assigned4
Programming
(See Figure 2-3 on page 2-23
s
such as and
To identify an external hotline extension:
1. Press
2. At the Extension: prompt, enter the external hotline extension
number— see "Valid Entries" above. For example, to program extension 30
as the external hotline, press
3. To assign or unassign the extension, press
displays.
4. To program another extension, press
shows on the display. Repeat Step 3.
5. Select another procedure or exit programming mode.
To program the external hotline phone number as Personal Speed Dial code 80:
1. Press
2. Dial the extension number of the external hotline.
3. Press
4. Enter the external hotline phone number exactly as you would dial it.
for the location of special programming buttons
e
on system phones.)
f 0 0 s s # 3 1 1
at extension 10 or 11.
3 0
f 0 0 s s c
.
f 8 0
.
.
D
until the appropriate value
n p
or until the extension number
Feature Reference
5-129