Message Light On (F09Xx) - Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions

Message Light On (F09XX)

Description
This feature turns on the message light at a specified extension (where XX is a
system extension number).
Related Features
For instructions on turning off the message light, see
n
(F10XX)''.
You may be able to use this feature to signal someone at a doorphone
n
extension. See
Considerations
This feature turns on the message light on system phones and standard
n
phones that have message lights. (See
1-15 for a list of standard phones that have message lights.)
For message-waiting capability, standard phones with LED-compatible
n
message-waiting lights must be connected to a PARTNER ACS processor
or 308EC module, or to an R3.1 or later 206 module in a system equipped
with a PARTNER ACS processor module.
On a standard phone, the message light flashes (only when the phone is
n
idle) to indicate that the extension has received a message.
Do not use this feature for an extension that is covered by the voice
n
messaging system. The voice messaging system automatically turns on
the message light at a subscriber's extension when a message is left in the
mailbox.
If you use this feature to signal someone at a doorphone extension, you
n
must use Message Light Off to turn the light off.
You can program a Message Light On button on a system phone to turn the
n
message light on at a specific extension with one touch.
Programming
(See Figure 2-3 on page 2-23
s
such as and
To program a Message Light On button:
1. Press
2. Enter the number of the extension to be programmed with this feature.
3. Press a programmable button.
5-186
Feature Reference
''Doorphone Extension (#604 and #605)'' on page
for the location of special programming buttons
e
on system phones.)
f 0 0 s s c
at extension 10 or 11.
''Message Light Off
''Standard Telephones'' on page
5-120.