Overview; Feature Reference - Lucent Technologies PARTNER Advanced Communications System Release 1.0 Programming And Use Instructions

Feature Reference

Overview

This chapter provides reference information for programming and using system
features. Features are listed in alphabetical order. System Programming
procedures include the procedure code (# and three-digit number) in the
heading; dial-code features include the feature code (F for
i
, plus a two- or three-digit code). Headings without codes are general
call-handling topics or Telephone Programming procedures.
Each feature includes the following information, if applicable:
Description
Related Features
Considerations
Valid Entries (
This chapter gives step-by-step instructions, using the following conventions:
All of the instructions in this chapter assume that system phones select
outside lines first and standard phones select intercom first (as
determined by each extension's setting for Automatic Line Selection).
See Chapter 2 for a review of the methods and buttons you can use
while in programming mode.
Programming instructions tell you to use the
values for specific settings. You can, however, enter a value using the
dialpad if you prefer. Similarly, there are different ways to exit
programming mode as described in Chapter 2—use the method with
which you are most comfortable.
For Telephone Programming, this chapter provides only the instructions
for Centralized Telephone Programming. To program from individual
extensions, users should refer to their User Instruction Cards .
Display prompts in the chapter are shown as they appear on
PARTNER-model phones. If you are using an MLS-model phone, some of
these prompts may be abbreviated.
Examples
Programming
Using
= factory setting)
5
f or I for
D
button to change
Overview
5-1