Modems - Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions

6. To monitor the fax machine at extension Y, use Fax Machine Extensions
(#601) to identify extension Y as a fax extension and program a Fax
Management button by programming the fax machine extension number
on an Auto Dial button.

Modems

There are several ways to use modems with your system, as described below.
NOTE:
Modems can connect directly to an extension jack without an adapter.
However, if you connect a high-speed modem through the control unit, you
may experience some degradation of efficiency and throughput, depending
on the quality of the central office lines connected to the system. To solve
the problem, either connect modems directly to the network interface jacks,
or contact your local telephone company for information about upgrading
line quality.
Standalone Modem for Placing Calls Only
A modem and a terminal allow you to dial out and connect to computer bulletin
boards and other data services. This setup, which lets you dial out but not receive
calls, is shown in
if you want the terminal to share an extension with a phone.
Figure 4-11. Standalone Modem for Placing Calls Only
To Use
Follow the modem manufacturer's instructions.
Figure 4-11. Note that the telephone is optional and can be used
Lines
Ext
CONTROL
X
UNIT
Telephone
(optional)
Ext. Message
Intercom Intercom
Feature ABC DEF
+ 1 2 3
– Conf GHI JKL MNO
4 5 6
Mic PQRS TUV WXYZ
Transfr
HFAI 7 8 9
Spkr Hold * 0 #
Modem
PC or
Terminal
Using Auxiliary Equipment
4-23