Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 405

7. Pressing lightly on the battery icon on the front of the battery assembly,
slide the locking latch downward to secure the assembly in place (see
Figure
the front of the battery assembly. This is the locked position.
Unlocked Position
Figure 6-5. Battery Assembly in Unlocked and Locked Position
8. Go to extension 10 or 11 and verify that the ReplaceSysBat W/Power On
message is no longer displayed. If it is displayed, check that the batteries
are installed correctly and that they are new. If the message is still
displayed, call the hotline.*
*
In the continental U.S., help is available at 1 800 628-2888. Outside the continental U.S.,
call your Lucent Technologies Representative or local authorized Dealer.
6-6
Troubleshooting
6-5). The "plus" icon and the battery icon should now be visible on
Locked Position