Upgrading From Partner Acs Release 1.0 To Release 1.1 Or Release; Or Later - Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions

Upgrading from PARTNER
ACS Release 1.0 to Release 1.1 or Release 2.0

or Later

If you are upgrading to a later release of PARTNER ACS using a PC card, use the
following procedure.
1. Power down the system.
2. Insert the PC Software Upgrade Card into either of the two PC Card slots in
the PARTNER ACS processor module.
3. Turn the system back on. While the system upgrades, the bicolor
(red/green) power LED on the processor flashes green and red alternately.
When the upgrade is finished (in about 20 seconds), the power LED
becomes steady green. All of your system and extension programming
settings will be intact.
2-28
Programming