Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 408

System Phone Does Not Work
Possible Cause 1: Telephone cord is plugged into wrong jack on bottom of system
phone.
What to do: Plug the modular telephone cord into the correct jack—see the
PARTNER Advanced Communications System Installation guide for instructions.
If the phone works properly, the problem is solved.
If the problem remains, go to Possible Cause 2.
Possible Cause 2: Phone needs to be reset.
What to do: Unplug the cord from the base of the problem phone. With the
handset hung up, plug the cord in again.
If the phone works properly, the problem is solved.
If the problem remains, go to Possible Cause 3.
Possible Cause 3: The telephone is defective.
What to do: Unplug the cord from the base of the problem phone. Then plug the
cord into a phone that you know works.
If the replacement phone works, the problem phone is faulty. Call the
hotline* to arrange for a replacement.
If the replacement phone does not work, go to Possible Cause 4.
Possible Cause 4: The telephone cord is defective.
What to do: Unplug the cord from the base of the phone and the wall jack.
Replace the cord with a cord that you know works.
If the phone works, the cord is faulty. Call the hotline* to arrange for a
replacement.
If the phone does not work and it is part of a combination extension, see
''Problems with Combination Extensions'' on page
If the phone does not work and it is not part of a combination extension, call
the hotline.*
*
In the continental U.S., help is available at 1 800 628-2888. Outside the continental U.S.,
call your Lucent Technologies Representative or local authorized Dealer.
6-23, Possible Cause 3.
6-9
Troubleshooting