Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 126

Press an Auto Dial button programmed with the account code.
5. Press an idle line or pool button:
If a Forced Account Code List exists and the account code is valid
(or if the Forced Account Code List is empty), you hear outside dial
tone. Go to Step 6.
If a Forced Account Code List exists and the account code is not
valid, you are denied access to the outside line. Verify the account
code with your System Manager, then repeat this procedure starting
from Step 1.
6. Make the telephone call.
7. To change the account code while on a call:
a. Press the programmed Account Code Entry button or press
1 2
.
b. Enter a different account code.
c. Press the programmed Account Code Entry button or press
1 2
.
If a Forced Account Code List exists and the account code is invalid,
you hear a denial tone. Verify the account code, then repeat Step 7,
making sure to enter a valid account code.
f
f
5-11
Feature Reference