Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 45

NOTE:
If Forced Account Code Entry (#307) is programmed for an extension, that
extension is required to enter an account code before dialing an outside
number—even those on the Emergency Phone Number List (#406) — on
all of the lines or pools assigned to that extension. If the Forced Account
Code List (#409) contains entries, the system checks the account code
against the list. If the account code is on the list, line or pool access is
allowed; if not, line or pool access is denied.
Table 2-1. Settings that Restrict an Extension's Access to a Specific Line
Type of Restrictions or
Permissions for the
Extension
Can receive and place
intercom (inside) calls only
Cannot use a specific
outside line or pool
Can only monitor call
activity and pick up held
calls on a specific line
Can only receive calls on a
specific line or pool
Can only place outgoing
calls on a specific line
*
If a line or pool is not assigned to the extension, a user can use Direct Line Pickup to
access the line or dial the pool access code to access a line in the pool. Emergency
numbers, Marked System Speed Dial numbers, Allowed Phone numbers, and numbers
dialed using the System Password override all dialing restrictions if a user has access to an
outside line or pool to place the call. If Forced Account Code Entry is programmed for an
extension, the user must enter an account code before accessing an outside line or pool. If
there are entries in the Forced Account Code List, the entered account code must match an
entry on that list.
2-14
Programming
Setting for Line Assignment
(#301) and Pool Extension
Assignment (#314)
All outside lines and pools
*
"not assigned"
Outside line or pool "not
*
assigned"
Outside line "assigned"
Outside line or pool
"assigned"
Outside line or pool may be
*
"assigned"
Setting for Line Access
Restriction (#302) and Pool
Access Restriction (#315)
"No access" for all lines and
pools
"No access" for that line or
pool
"No access" for that line
"Incoming only" for that line
or pool
Outgoing only for that line
or pool