Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 287

Programming
(See Figure 2-3 on page 2-23
s
such as and
To change the Line Coverage setting for an extension:
1. Press
2. Enter the desired line number. For example, to program line 12, press
3. Enter the number of the extension to be assigned ownership of the line.
4. At this point:
n
n
5. Select another procedure or exit programming mode.
5-172
Feature Reference
for the location of special programming buttons
e
on system phones.)
f 0 0 s s # 2 0 8
at extension 10 or 11.
To delete the current setting, press
To program another line, press
the display. Then repeat Step 3.
r
.
n p
or until the line number shows on
1 2
.