Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 304

Valid Entries
1 = Active 4
2 = Not Active
Programming
(See Figure 2-3 on page 2-23
s
such as and
To change the setting of the MUSIC ON HOLD jack:
1. Press
2. To activate or deactivate the MUSIC ON HOLD jack, press
appropriate value displays.
3. Select another procedure or exit programming mode.
for the location of special programming buttons
e
on system phones.)
f 0 0 s s # 6 0 2
at extension 10 or 11.
D
until the
5-189
Feature Reference