Toll Call Prefix (#402) - Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions

Toll Call Prefix (#402)

Description
This System Programming procedure indicates whether users must dial a 0 or 1
before the area code to make a long-distance call, or just the area code and
number. This feature should be set to reflect the dialing patterns of your local
telephone company.
Related Features
This procedure affects the operation of dialing restrictions and permissions. For
more information, see
''Disallowed Phone Number Lists (#404)'' on page
Number List (#406)'' on page
Valid Entries
1 = 0 or 1 required before Area Code and Number 4
2 = Area Code and Number Only
Program
(See Figure 2-3 on page 2-23
s
such as and
To change the Toll Call Prefix setting:
1. Press
2. Press
3. Select another procedure or exit programming mode.
''Allowed Phone Number Lists (#407)'' on page
5-122.
for the location of special programming buttons
e
on system phones.)
f 0 0 s s # 4 0 2
at extension 10 or 11.
D
until the appropriate value displays.
5-13,
5-109, and ''Emergency Phone
Feature Reference
5-259