Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 377

Programming
(See Figure 2-3 on page 2-23
s
such as and
To change the Transfer Return Extension for a specific extension:
1. Press
2. Dial the number of the originating extension.
3. Dial the number of the extension to which the call should return if it is not
answered.
4. To program another extension, press
shows on the display. Repeat Step 3.
5. Select another procedure or exit programming mode.
5-262
Feature Reference
for the location of special programming buttons
e
on system phones.)
f 0 0 s s # 3 0 6
at extension 10 or 11.
n p
or until the extension number