Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 188

To program a Call Log Display button:
1. Press
2. Enter the number of the extension to be programmed with this feature.
3. Press a programmable button with lights.
4. Press
5. Program another button for this extension or exit programming mode.
Using the Call ID Logging and Dialing Feature
When Caller ID information is logged for your extension and you have
programmed a Call Log button, the word Calls is displayed, as shown in
5-1.
Figure 5-1. System Phone Display Showing Logged Calls
To view the log, press your preprogrammed Call Log button. The green light
flutters, the Call Log is activated. One of several messages is displayed. Press the
More button repeatedly until you see the Telephone Number Display.
At the Telephone Number Display, shown in
is shown. (The log displays the calls in last-in-first-out order.)
An Out-of-Area message displays if the call was dialed from a region that does
not support Caller ID. A Privacy message displays if the caller blocked
transmission of Caller ID information . A No Number message displays if no
information was received.
Figure 5-2. Caller ID Telephone Number Display
You have several options at this display:
Press the Next button to view the next logged call.
If you have a second logged call, it is displayed.
Press the Erase button to erase the log record.
An Entry Erased message displays.
f 0 0 s c
f 2 3
.
at extension 10 or 11.
Figure 5-2, the newest call in the log
Feature Reference
Figure
5-73