Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 214

Valid Entries
1 = Assigned
2 = Not Assigned
Programming
(See Figure 2-3 on page 2-23
s
such as
To identify the lines on which outside calls should be answered for Direct
Extension Dial:
1. Press
2. Enter the desired system line number. For example, to specify line 1, press
0 1
3. To assign or unassign Direct Extension Dial, press
appropriate value displays.
4. To specify another line, press
shows on the display. Then repeat Step 3.
5. Repeat Steps 3 and 4 for all desired lines.
6. Select another procedure or exit programming mode.
for the location of special programming buttons
e
and on system phones.)
f 0 0 s s # 2 0 5
.
D
n p
or until the line number
Feature Reference
.
until the
5-99