Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 67

If a user has a standard phone, Personal Speed Dial Numbers for the
extension can be programmed only by using Centralized Telephone
Programming.
If a user has a standard phone or a non-display system phone, Extension
Name Display for the extension can be programmed only by using
Centralized Telephone Programming.
To program at the extension, use the following procedure:
1. To start programming, dial
The green lights next to buttons on which lines or pools are assigned for
the extension show the current Line Ringing settings. Remaining buttons
can be programmed with telephone numbers, extension numbers, or
system features.
2. To assign a name to the extension, press left
character codes. See ''Extension Name Display'' on page 5-126 for the
codes.
3. Program Personal Speed Dial Numbers, Auto Dial numbers, or system
features as described in
To erase the current programming from a button, press the button, then
!
press
4. To exit programming mode, you can press
off-hook, then place it back in the cradle.
2-36
Programming
f 0 0
Chapter 5.
.
.
i
, then enter the
f 0 0
, or lift the handset