Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 138

Programming
(See Figure 2-3 on page 2-23
s
such as
To change the Automatic Extension Privacy setting for an extension:
1. Press
10 or 11.
2. Enter the number of the extension to be programmed. For example, to
program extension 16, press
3. To assign or unassign Automatic Extension Privacy, press
the appropriate value displays.
4. To program another extension, press
extension number shows on the display. Then repeat Step 3.
5. Select another procedure or exit programming mode.
for the location of special programming buttons
e
and on system phones.)
f 0 0 s s # 3 0 4
1 6
.
D
n p
or until the
Feature Reference
at extension
until
5-23