Station Lock (F21) - Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions

Station Lock (F21)

Description
This feature is available only on system and standard touch-tone phones.
This feature lets users enter a four-digit code on their telephone dialpad to "lock"
their extension. Later, the user enters the identical code to unlock the extension.
Station Lock helps to prevent unauthorized people from making outside calls from
these extensions. You should recommend that users lock their extensions
whenever they leave their desks for extended periods of time.
Related Features
All outside numbers except Marked System Speed Dial Numbers and
n
numbers on the Emergency Phone Number List (#406) are restricted
from locked extensions.
If a user forgets the code, use Station Unlock to unlock the extension.
n
Do not lock External Hotline extensions.
n
Station Lock returns to the status (on/off) it was in before a power failure
n
occurred or System Reset (#728) was used.
You cannot use the Caller ID Call Logging and Dialing feature when your
n
extension is locked.
Considerations
You can program a Station Lock button on a system phone. A button with
n
lights is recommended, so the user can quickly determine whether or not
the extension is locked.
Users can enter a different code each time they lock their extension.
n
A user at a locked extension can make intercom calls and can receive
n
intercom and outside calls.
Programming
(See Figure 2-3 on page 2-23
s
such as and
To program a Station Lock button:
1. Press
2. Enter the number of the extension to be programmed with this feature.
3. Press a programmable button.
4. Press
for the location of special programming buttons
e
on system phones.)
f 0 0 s s c
at extension 10 or 11.
f 2 1
.
5-245
Feature Reference