Auxiliary Equipment - Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions

allow the user to dial, signal, or transfer calls to system extensions with one touch.
For more information about Auto Dial buttons, see
Standard Telephones
You can also use industry-standard single-line rotary or touch-tone telephones,
including feature phones with built-in feature buttons and lights, with the system.
This guide refers to such telephones as standard phones . Lucent
Technologies-certified standard phones are recommended.
The following Lucent Technologies phones can make use of the system's
message-waiting capability:
2500 YMGL Single-Line Analog Telephone Set
8101 Analog Telephone
8101M Analog Telephone (This model is recommended.)
8102 Analog Telephone
8110 Analog Telephone
7102 Plus Analog Voice Terminal
Check with your local Lucent Technologies Representative or local Authorized
Dealer to find out whether other standard phones with message-waiting lights will
work.
NOTE:
For message waiting capability, you must connect standard phones with
LED-compatible message-waiting lights to a PARTNER ACS processor
module, 308EC module, or to Release 3.1 (R3.1) or later 206 modules. This
message-waiting capability does not work with standard phones with
neon-type message-waiting lights.

Auxiliary Equipment

You can connect many types of telecommunications devices to your system
without expensive adapters or additional phone lines—for example, answering
machines, credit card scanners, and fax machines. Many industry-standard,
single-line devices will work with the system regardless of the manufacturer.
For more information, refer to the list in
Technologies Representative or local Authorized Dealer. Also, see
advice on setting up auxiliary equipment to work effectively with the system.
''Auto Dialing'' on page
Chapter 4 or contact your Lucent
5-19.
Chapter 4 for
1-15
Overview