Programming Features Onto A Single Telephone; Copying Feature And Sa/Icom Buttons - Lucent Technologies MERLIN LEGEND Release 7.0 System Manager's Quick Reference

MERLIN LEGEND Communications System R7.0
System Manager's Quick Reference 555-670-119
Managing the System
Performing Centralized Telephone Programming

Programming Features onto a Single Telephone

At the Centralized Programming menu, use the following procedure to program
features onto a single telephone. See
codes.
Console Procedure
PC Procedure

Copying Feature and SA/ICOM Buttons

Use the Copy Extension feature to copy an extension's programmed buttons
(with some exceptions) to one or more extensions. Program the features
individually on an extension to create a template that can then be copied to other
extensions in the system.
Only extensions of the same type can be copied to one another (that is, analog
to analog, MLX to MLX, MLS to MLS, and ETR to ETR) because the four
telephones have different button layouts. You need one template for each type of
telephone in your system.
A Multi-Function Module's (MFM) programming can be copied to or from another
MFM. A Direct Line Console (DLC) can be copied only to another DLC.
Single-line telephone and QCC features cannot be copied.
"Features"
Sys
More
Programming
Dial ext. no.
Ext
button Dial feature code
beginning to program another button)
no.
Select button ( + function key or
key) Type feature code
beginning to program another button)
in Chapter 1 for a list of feature
Cntr-Prg
Enter Start
(repeat from
Enter
Exit
Type ext.
+ function
(repeat from
Issue 1
April 1999
49
Program
Select