System Date (#101) - Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions

System Date (#101)

Description
This System Programming procedure sets the month, day, and year. The system
displays only the month and day on display phones when the phone is idle; the
month, day, and year print on SMDR call reports.
Related Features
The System Date is used to date-stamp the backup files when you use
n
Backup Programming—Automatic (#123) and Backup Programming—
Manual (#124).
Backup Programming—Automatic (#123) uses the System Date to
n
schedule the automatic backups.
Backup Programming—Automatic (#123) and Backup Programming—
n
Manual (#124) do not backup the System Date.
Restore Programming (#125) does not restore the System Date.
n
Programming
(See Figure 2-3 on page 2-23
s
such as and
To change the System Date:
1. Press
2. Enter today's date in the form mmddyy (month, day, and year), including
leading zeros for single-digit months or days. For example, to enter April
26, 1997, press
System Date
Data 042697
3. Select another procedure or exit programming mode.
for the location of special programming buttons
e
on system phones.)
f 0 0 s s # 1 0 1
at extension 10 or 11.
0 4 2 6 9 7
. A display similar to the following appears:
5-249
Feature Reference