Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 359

Programming
(See Figure 2-3 on page 2-23
s
such as and
To change the Star Code Dial Delay setting:
1. Press
The current setting is displayed.
2. Press the number on the dialpad for the setting you want (see "Valid
Entries," above), or press
3. To return to the default setting, press
4. Select another procedure or exit programming mode.
5-244
Feature Reference
for the location of special programming buttons
e
on system phones.)
f 0 0 s s # 4 1 0
at extension 10 or 11.
D
or
d
until the correct setting is displayed.
r
.