Smdr Top Of Page (#609) - Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions

SMDR Top of Page (#609)

Description
Call Reporting (often referred to as Station Message Detail Recording or SMDR)
provides detailed tracking of telephone usage in a printed report. This System
Programming procedure notifies the system that the printer has been aligned to
the top of a new page. Use this feature after inserting paper, clearing a jam, or to
print a new header after changing SMDR Output Format or SMDR Talk Time.
When this feature is used, the system prints a new call report header.
Related Features
You can use SMDR Record Type (#608) to specify the type of calls to be
n
included on call reports.
You can use SMDR Output Format (#610) to identify whether a maximum
n
of 15 or 24 digits is printed for dialed numbers on the call report.
You can set SMDR Talk Time (#611) to active to print on call reports the
n
time a user spends on an incoming outside call—from the time the user
answers the call to the time the call is disconnected from the system.
You can use Display Language (#303) to specify the language in which
n
the call report page header should print.
Considerations
This feature requires special hardware and/or software. For more
n
information, see
This procedure is skipped in the sequence of programming procedures
n
when cycling. To use this procedure, enter the code directly.
Using
1. Make sure the paper in the printer is aligned at the top of a new page.
2. Press
The system responds by printing the call report page header .
3. Select another procedure or exit programming mode.
''Call Reporting Devices (SMDR)'' on page
f 0 0 s s # 6 0 9
.
4-10.
5-239
Feature Reference