Allowed List Assignments (#408) - Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions

Allowed List Assignments (#408)

Description
This System Programming procedure lets you assign up to eight Allowed Phone
Number Lists to a specific extension.
Related Features
You must use Allowed Phone Number Lists (#407) to create the lists of allowed
telephone numbers before you use this procedure.
Valid Entries
1 = Assigned to extension
2 = Not Assigned to extension
Programming
(See Figure 2-3 on page 2-23
s
such as
To assign Allowed Phone Number Lists to an extension:
1. Press
10 or 11 .
2. Enter the number of the extension to be programmed. For example, to
program extension 27, press
appears:
AllowTo 27
List Number:
3. Enter the list number (1–8). For example, to select list 1, press
4. To assign or unassign the list, press
displays.
5. At this point:
6. Select another procedure or exit programming mode.
5-12
Feature Reference
for the location of special programming buttons
e
and on system phones.)
f 0 0 s s # 4 0 8
2 7
To assign or unassign another list to this extension, press
or until the list number shows on the display. Then repeat Step 4.
To program another extension, press
and begin at Step 2.
. A display similar to the following
D
until the appropriate value
N
or
at extension
1
.
n
P